Insights & Guides
How to Write a Surface Preparation Specification That Gets Results
This guide covers what a complete surface preparation specification must contain, how to select the right standards, common specification weaknesses that
Anchor Profile Measurement: Field Guide for Inspectors
This guide explains what anchor profile is, why it matters, the three ASTM D4417 measurement methods, and how to perform a compliant...
Complete Guide to SSPC Surface Preparation Standards: SP-1 Through SP-16 and WJ Levels
This guide covers all SSPC surface preparation standards currently in use — from solvent cleaning (SP-1) through the highest blast cleaning levels...
Soluble Salt Contamination: Why It Causes Coating Failure and How to Test for It
Soluble salts in the context of steel surface preparation are ionic chemical compounds — primarily chlorides, sulphates and nitrates — that dissolve...
Flash Rust: What It Is, Why It Matters, and How to Prevent It
This guide explains what flash rust is, why it forms, how to assess it, and how to prevent it — or avoid...
Water Jetting Surface Preparation Standards: WJ-1 Through WJ-4 Explained
Water jetting uses pressurised water — typically at pressures above 1,700 bar (25,000 psi) for UHP applications — directed at the steel...
SSPC-SP6 vs SP10: Which Surface Preparation Standard Does Your Project Need?
This article explains what each standard requires, how they differ in practice, and how to determine which one your project needs.
SSPC-SP5 White Metal Blast: When Is It Required?
This guide explains what SSPC-SP5 requires, which applications genuinely demand it, and how to assess whether it is the right specification for...
SSPC-SP11 Power Tool Cleaning to Bare Metal: Complete Technical Guide
Complete guide to SSPC-SP11: what bare metal means, how it differs from SP-10, minimum <a href="/pages/anchor-profile">anchor profile</a> requirements, and
How to Prepare Metal for Painting: Surface Preparation Methods Compared
The Grit-Free Surface Preparation Playbook covers every preparation method, standards reference, and method selection matrix — free download.
Weld Cleaning and Post-Weld Surface Preparation: Methods and Standards
The Grit-Free Surface Preparation Playbook covers weld zone preparation, Two-Step Method, field joint coating, and the full standards reference — free
What is Bristle Blasting? How It Works, Standards It Achieves, and When to Use It
The Grit-Free Surface Preparation Playbook includes ready-to-use specification language, standards tables, ATEX compliance guidance, and field case studies.
Alternatives to Sandblasting Steel: Complete Method Comparison
The Grit-Free Surface Preparation Playbook covers every alternative method — with standards tables, method selection matrix, ATEX compliance guide, and field
How to Remove Mill Scale from Steel: Tools, Methods, and Specifications
Mill scale is a layered iron oxide coating that forms on the surface of steel during hot rolling. It consists of three...
Surface Preparation for Pipeline Field Joints and Corroded Welds
A pipeline field joint presents several surface preparation challenges that do not exist at a fabrication facility:
How to Remove Heavy Rust from Steel Without Sandblasting
This guide covers the practical methods for removing heavy rust from steel without sandblasting, the standards that define what "clean" means after
How to Remove Vinyl Decals from Vehicles and Equipment
This guide covers every available method for vinyl decal removal, when each is appropriate, and the step-by-step procedure for removing vinyl cleanly...
Surface Preparation in ATEX Zone 1: Requirements and Approved Methods
Yet these are precisely the environments where maintenance of protective coatings is most critical. Offshore structures in corrosive marine atmospheres
How to Achieve SSPC-SP10-Comparable Results Without Sandblasting
This guide explains exactly how to achieve results comparable to SSPC-SP10 using the Bristle Blaster® — the step-by-step procedure, the equipment required
SSPC-SP10 Near-White Metal Blast: The Complete Technical Guide
This guide covers the complete SSPC-SP10 standard: its definition, equivalences with international standards, requirements, verification procedures and the
Bristle Blaster® vs. Sandblasting: Which Method Achieves SSPC-SP10-Comparable Results?
This comparison is based on published independent research and MontiPower-commissioned third-party testing, not marketing claims. It covers the parameters
What Is Corrosion? Types, Causes and How Surface Preparation Stops It
Understanding what corrosion is, how it starts and what stops it is the foundation of any effective asset protection strategy. This guide...
Mill Scale on Steel: What It Is and How to Remove It
This guide explains what mill scale is, why it must be removed before any protective coating is applied, and which removal methods...
Recyclability
We are committed to implementing circularity and sustainable practices in our operations. Our circularity program, Monti League, allows clients to return
No articles match. Ask a specialist →