Prepper RoboticsPrepper® Q10 · Clamped operations
The Cleantech Prepper® Q10 enables optimal coating performance through a programmable and automated process, providing a constant and reliable roughness profile to the substrate....
- Automated, repeatable surface prep
- Consistent quality across every shift
- For large areas, height and confined spaces
- Built on the same controlled principle
Stocked and serviced by partners in 65+ countries. Find your local distributor.
Simultaneous removal & profiling
The Cleantech Prepper® Q10 enables optimal coating performance through a programmable and automated process, providing a constant and reliable roughness profile to the substrate. Program the desired roughness and the Q10 delivers a regular peak height and peak density, without safety hazards, dust or loose media. The Q10 can also be integrated into factory-applied coating processes.
- Up to 4x faster than conventional blasting, enabling greater coverage per hour
- 5 million strikes per minute
- Adjustable accelerator bar enables changes to roughness profile
- 1 m² cleaned in 127 seconds
- Dust collection built-in
- Oscillating brushes enable uniform, optimal surface coverage
The Prepper® Q10 for clamped operations treats considerably wider surfaces using only one machine. Available on request and project-specific.
Simultaneous removal & profiling, in one pass
Impact
Bristle tips strike the surface at kinetic energy comparable to abrasive grit-blast media.
Accelerator bar
The patented accelerator bar amplifies tip impact for maximum removal efficiency.
Retraction
Tips retract instantly, creating the anchor profile without smearing, burnishing or heat.
Coating-ready
A clean, profiled, grit-free substrate, comparable to abrasive blasting, 65–85 µm Rz (2.6–3.3 mil), ready to coat.
The power of blasting. None of the fallout.
Grit-free
No loose abrasive, no media, minimal containment.
Blast-comparable cleanliness and anchoring surface profile — without loose abrasives
A verified, coating-ready standard. SSPC-SP 10 / SP 5.
In-service & spot repair
Works live, at height and in confined spaces, no blast pot.
Cold-working
No heat, no smearing, no grit embedment in the substrate.
Datasheets & manuals
Recent case studies
Case StudySpecified by name: the Bristle Blaster® in the CCGS Limnos drydock specification
The Canadian Coast Guard’s 2023 CCGS Limnos drydock specification names the “Bristle Blaster” as the required method for compartments and...
Read the case study →
BondingDeutsche Bahn field test: faster bonded-joint corrosion repair with MONTI surface preparation
A November 2011 Deutsche Bahn field test on an ICE 3 trainset used MONTI bristle tools to prepare bonded-joint surfaces,...
Read the case study →
Bristle BlasterShell SDA project: grit-free weld-seam preparation with the Bristle Blaster®
On Shell’s SDA project at the Pernis refinery, 10 Bristle Blaster® Pneumatic tools prepared 2,000 weld seams to Sa 2½...
Read the case study →Prepper® Q10 · Clamped operations on the job
Put it to work on your next job.
Pricing on request, tailored to your project and region via your local distributor. Send the job in. A specialist replies, usually within one business day.
Get a quote for the
Prepper® Q10 · Clamped operations.
Tell us your application and substrate. A specialist will recommend the right configuration and connect you with your local MontiPower® partner.