Surface Preparation ToolBristle Blaster® Ultimate Cordless
The new cordless technology for the Bristle Blaster ® including the Safety switch. This makes it easier to work in areas that are difficult to access,
- Cordless freedom with integrated safety switch
- Reaches confined and hard-to-access areas
- Anti-vibration handle and reinforced fronthead
- Blast-comparable cleanliness and anchoring surface profile — without loose abrasives
Stocked and serviced by partners in 65+ countries. Find your local distributor.
Simultaneous removal & profiling
Overview
The new cordless technology for the Bristle Blaster ® including the Safety switch. This makes it easier to work in areas that are difficult to access, for instance at great heights. BRISTLE BLASTER ® ULTIMATE CORDLESS The new cordless technology for the Bristle Blaster ® including the safety switch. It includes the anti-vibrating handle and a new robust fronthead. Chargers are part of the Cordless Alliance System; you can combine machines, battery packs and chargers of different manufacturers without any problems Approx. 25 minutes surface preparation time for 8Ah/18V Adjustable accelerator bar to fit difficult to reach objects 2200 rpm for controlled, low-vibration surface preparation.
Specifications
| Surface cleanliness | Comparable to ISO 8501-1 Sa2 ½ & Sa3 |
| Comparable grade | SSPC-SP 10 / SP 5 · NACE No. 2 / No. 1 |
| Anchor profile | 65–85 µm Rz (up to 120 µm Rz) |
| Working speed | ~1.1 m²/hr (API-5L-X42, rust grade B) |
| Loose abrasive | None — grit-free |
| Substrate impact | Cold-working, no heat |
| Drive | Cordless · 18 V |
FAQ
What results does the Bristle Blaster® Cordless Technology deliver?
What is the working time of the Bristle Blaster® Cordless?
Downloads
Simultaneous removal & profiling, in one pass
Impact
Bristle tips strike the surface at kinetic energy comparable to abrasive grit-blast media.
Accelerator bar
The patented accelerator bar amplifies tip impact for maximum removal efficiency.
Retraction
Tips retract instantly, creating the anchor profile without smearing, burnishing or heat.
Coating-ready
A clean, profiled, grit-free substrate, comparable to abrasive blasting, 65–85 µm Rz (2.6–3.3 mil), ready to coat.
Same result. None of the downsides.
The power of blasting. None of the fallout.
Grit-free
No loose abrasive, no media, minimal containment.
Blast-comparable cleanliness and anchoring surface profile — without loose abrasives
A verified, coating-ready standard. SSPC-SP 10 / SP 5.
In-service & spot repair
Works live, at height and in confined spaces, no blast pot.
Cold-working
No heat, no smearing, no grit embedment in the substrate.
CAS: Cordless Alliance System
Works with this tool
Runs on the Cordless Alliance System: one 18 V battery platform shared across brands, so batteries and chargers you already own fit this tool. CAS product brochure 2025 (PDF) ↓
Datasheets & manuals
Not sure which belt or accelerator bar you need?
Answer a few questions about the job and the Belt Selector recommends the right configuration.
Recent case studies
Case StudySpecified by name: the Bristle Blaster® in the CCGS Limnos drydock specification
The Canadian Coast Guard’s 2023 CCGS Limnos drydock specification names the “Bristle Blaster” as the required method for compartments and...
Read the case study →
BondingDeutsche Bahn field test: faster bonded-joint corrosion repair with MONTI surface preparation
A November 2011 Deutsche Bahn field test on an ICE 3 trainset used MONTI bristle tools to prepare bonded-joint surfaces,...
Read the case study →
Bristle BlasterShell SDA project: grit-free weld-seam preparation with the Bristle Blaster®
On Shell’s SDA project at the Pernis refinery, 10 Bristle Blaster® Pneumatic tools prepared 2,000 weld seams to Sa 2½...
Read the case study →Bristle Blaster® Ultimate Cordless on the job
Dustless Blasting with the Bristle Blaster®
Dustless Blasting Nowadays, dustless blasting is considered the solution to one of the biggest problems caused by traditional...
Read →Bristle Blaster® Ultimate Cordless: SSPC-SP10 Surface Prep Without Grit, Without a Cord
For pipeline field joint coating, bridge and infrastructure spot repair, offshore structural maintenance in non-ATEX-classified zones, and any...
Read →MontiPower Ultimate Cordless Tools: Built on CAS Battery Technology
For maintenance operations in energy, offshore, marine, and heavy industry where multiple surface preparation tasks are performed in...
Read →Put it to work on your next job.
Pricing on request, tailored to your project and region via your local distributor. Send the job in. A specialist replies, usually within one business day.
Get a quote for the
Bristle Blaster® Ultimate Cordless.
Tell us your application and substrate. A specialist will recommend the right configuration and connect you with your local MontiPower® partner.