Tercoo®
The essential first step for thick, tough substrates. Rotating discs with tungsten carbide pins strike the surface in a controlled pendulum motion, removing paint, bitumen, epoxy and heavy rust without generating heat.
Discs, drive unit and the two-step kit
Hammering impact. No heat.
Flexible SBR discs contain tungsten carbide pins at a specific angle. Rotation drives them into the surface in a controlled pendulum motion, leaving a clean, roughened substrate ready for bristle blasting.
Flexible SBR discs
Tungsten carbide pins positioned at a precise angle for optimal impact force.
Centrifugal force
Rotation drives the pins to strike the surface in a controlled pendulum motion.
Hammering impact
Removes paint, bitumen, epoxy and rust without generating heat.
Thorough cleanliness
Leaves surfaces ready for bristle blasting, even with coaltar epoxy.
Strip it back.
Tercoo® + Bristle Blaster®: one for all.
Together they form a complete surface preparation system, from removal to activation, powered by the same drive unit. Tercoo® does the heavy bulk removal, then the Bristle Blaster® activates and profiles to standard.
- Step 1. Tercoo®: removes thick coatings, corrosion, tar and rubber from steel or concrete
- Step 2. Bristle Blaster®: activates and profiles to ISO 8503, a high peak-count surface
- One drive unit powers both steps, less equipment, simpler inventory
- Fast changeover, swap from Tercoo® to bristle blasting in about 30 seconds
Built for heavy-duty projects.
Tercoo® handles the punishing thick-coating work first, which means faster prep and longer belt life downstream.
High productivity
Removes coatings up to 5 mm (0.2 in) thick, cutting preparation time dramatically.
Belt extension & savings
Handling heavy removal first extends the life of your Bristle Blaster® belts.
Drive-unit compatible
Works with Bristle Blaster® Ultimate Electric, Cordless & Pneumatic Double.
~30 m² per disc pack
Approx. 30 m² of Rustgrade B corrosion per disc pack.
Tercoo® on tough coatings
Thick coatings, tar and rust stripped fast.
Register your kit. Reorder discs in one tap.
Register your tool
Activate in 60 seconds and start your extended 3-year warranty, wherever you bought it.
Registration — coming soonReorder Tercoo® discs
Reorder the exact consumables for your registered tools, no part numbers to look up.
Browse parts & reorder →
Vibration & noise, documented to ISO 5349-2
Offshore contractors and asset owners ask for independent proof before they qualify a tool. This is it: an independent hand-arm vibration and noise assessment, measured to NS-EN ISO 5349-2 under simulated field conditions, so operator exposure can be planned with confidence.
| Configuration | Noise Leq dB(A) | Hand-arm vibration m/s² | Vibration guideline (max/day) |
|---|
Independent assessment by Brekke & Strand Akustikk AS (report AKU-01, 2026) to NS-EN ISO 5349-2. Values are trigger-time levels including measurement uncertainty; daily-use guidance follows the vibration action/limit bands and assumes hearing protection. Confirm exposure for your own work using the report and an ISO 5349-2 calculator. This is a vibration & noise assessment, not an ATEX certification.
Tercoo® is available via the
MontiPower® Global Network.
Contact us to find your local partner and see the two-step method on your substrate.