Analyses et guides
Research study: qualifying offshore-wind repair coatings — and the surface-prep step behind them (RepaKORR)
The BMBF-funded RepaKORR project studied damage, accelerated ageing and offshore application procedures for wind-structure repair coatings — with grit-free mechanical surface prep...
Blast-Less Surface Prep Tools for Coating Companies
The contractor's guide to blast-less preparation: what it does to bids, which SSPC/ISO specs it meets, the kit a crew needs, and...
What Makes a Coating Specification Enforceable
A specification is not a recommendation, a guideline or a suggestion. It is a formal, legal document that tells the contractor specifically...
Surface Preparation of Concrete Before Coating: Contaminants, Defects and Methods
As with steel, the success of any coating system on concrete is highly dependent on the surface beneath it. Concrete, though, brings...
Bristle Blaster® Ultimate Cordless: SSPC-SP10 Surface Prep Without Grit, Without a Cord
For pipeline field joint coating, bridge and infrastructure spot repair, offshore structural maintenance in non-ATEX-classified zones, and any application
How to Write a Surface Preparation Specification That Gets Results
This guide covers what a complete surface preparation specification must contain, how to select the right standards, common specification weaknesses that
Complete Guide to SSPC Surface Preparation Standards: SP-1 Through SP-16 and WJ Levels
This guide covers all SSPC surface preparation standards currently in use — from solvent cleaning (SP-1) through the highest blast cleaning levels...
Water Jetting Surface Preparation Standards: WJ-1 Through WJ-4 Explained
Water jetting uses pressurised water — typically at pressures above 1,700 bar (25,000 psi) for UHP applications — directed at the steel...
SSPC-SP6 vs SP10: Which Surface Preparation Standard Does Your Project Need?
This article explains what each standard requires, how they differ in practice, and how to determine which one your project needs.
SSPC-SP5 White Metal Blast: When Is It Required?
This guide explains what SSPC-SP5 requires, which applications genuinely demand it, and how to assess whether it is the right specification for...
SSPC-SP11 Power Tool Cleaning to Bare Metal: Complete Technical Guide
Complete guide to SSPC-SP11: what bare metal means, how it differs from SP-10, minimum <a href="/pages/anchor-profile">anchor profile</a> requirements, and
Weld Cleaning and Post-Weld Surface Preparation: Methods and Standards
The Grit-Free Surface Preparation Playbook covers weld zone preparation, Two-Step Method, field joint coating, and the full standards reference — free
What is Bristle Blasting? How It Works, Standards It Achieves, and When to Use It
The Grit-Free Surface Preparation Playbook includes ready-to-use specification language, standards tables, ATEX compliance guidance, and field case studies.
How to Remove Mill Scale from Steel: Tools, Methods, and Specifications
Mill scale is a layered iron oxide coating that forms on the surface of steel during hot rolling. It consists of three...
How to Achieve SSPC-SP10-Comparable Results Without Sandblasting
This guide explains exactly how to achieve results comparable to SSPC-SP10 using the Bristle Blaster® — the step-by-step procedure, the equipment required
SSPC-SP10 Near-White Metal Blast: The Complete Technical Guide
This guide covers the complete SSPC-SP10 standard: its definition, equivalences with international standards, requirements, verification procedures and the
Bristle Blaster® vs. Sandblasting: Which Method Achieves SSPC-SP10-Comparable Results?
This comparison is based on published independent research and MontiPower-commissioned third-party testing, not marketing claims. It covers the parameters
Aucun article ne correspond. Demander à un spécialiste →