Signage & Architectural Metal
Precise, controlled surface preparation for signage, façades, and architectural metalwork, clean adhesion without damaging visible finishes.
Where the finish is the product
In signage and architectural metalwork, the surface is the product, it's seen up close, every day. Preparation has to deliver reliable adhesion for paint, powder coat, or vinyl without marking, gouging, or overheating finishes that the customer will scrutinize.
“On a sign, every scratch is on display. Preparation has to be clean, controlled, and consistent.”
Visible finishes
Surfaces seen up close where any mark, scratch, or burnish shows through.
Thin & sensitive metal
Sheet, trim, and aluminum that warp or overheat under aggressive methods.
Mixed substrates
Steel, aluminum, and coated metals each needing the right, controlled touch.
Adhesion demands
Paint, powder coat, and vinyl that fail early if the surface isn't properly keyed.
Adhesion without damage
Aggressive grinding and blasting can warp thin sheet, burnish aluminum, or leave marks that telegraph through the final finish. MontiPower's dynamically controlled tools prepare the surface precisely, enough profile for adhesion, without harming the substrate or the look. The Vinyl Zapper® is built exactly for this work, with the MBX® alongside for corroded substrates.
The MBX® range for signage
Lightweight electric and pneumatic models for graphic removal and surface prep on sign substrates.
CordlessMBX® Cordless
18V cordless with dead-man's switch, protection cover and vibration-absorbing handle.
En savoir plus →
Variable speedMBX® Electric Variomatic
Removes rust, paint and underseal. 230V & 120V, adjustable speed.
En savoir plus →
1.3 kg / 2.9 lbMBX® Pneumatic
Lean, lightweight (1.3 kg / 2.9 lb). Resharpen brushes without removing from the adaptor.
En savoir plus →
MBX® Pneumatic Reverse
Reverse-action lightweight pneumatic for awkward access and directionality.
En savoir plus →
MBX® Axial
For corrosion in hard-to-reach areas: door rabbets, roof joints, wheel housings.
En savoir plus →The Vinyl Zapper® range for signage
Purpose-built for vinyl graphics, wraps and decals: strip old signage cleanly before the next install.
ElectricVinyl Zapper® Electric
Removes vinyl, foils, stickers and tape. No damage on metal, glass, fibreglass or hardwood.
En savoir plus →
CordlessVinyl Zapper® Ultimate
Quick click & go adaptor. Batteries interchangeable across CAS-system partners.
En savoir plus →
PneumaticVinyl Zapper® Pneumatic
Lightweight pneumatic with the quick click & go adaptor system.
En savoir plus →Signage & fabrication tasks
Vinyl & coating removal
Strip old vinyl, decals, and coatings cleanly, without damaging the panel beneath.
Adhesion prep
Create a controlled profile for paint, powder coat, or new vinyl to bond reliably.
Aluminum & trim
Prepare sensitive metals without smearing, gouging, or overheating.
Weld & edge cleanup
Clean welds and edges on fabricated signage without over-grinding.
Fabrication benefits
No surface damage
Controlled interaction that preserves visible finishes.
Reliable adhesion
Consistent profile for paint, powder coat, and vinyl bonding.
Multi-material
Safe across steel, aluminum, and coated architectural metals.
Repeatable quality
Consistent results across batches and panels.
Clean process
Minimal dust and debris in the fabrication shop.
Faster turnaround
Efficient prep that keeps fabrication moving.
La confiance de projets dans le monde entier
Adhesive, foil and coating removal without heat or substrate damage: preparation for reapplication on vehicles, signage and marked surfaces.
Vinyl, stickers & double-sided tape removal
Clean removal from panels and substrates, no solvent soak, no paint damage.
Resources for this industry
Clean removal without substrate damage, the Vinyl Zapper® practice set.
Découvrez ce qui convient à ce travail
Precision for visible work
With decades of experience and patented technology, MontiPower supports fabricators and finishers who can't hide a flaw. Our controlled tools deliver consistent, repeatable preparation across steel, aluminum, and architectural metals, for finishes that last and look right.