SODA BLASTING

Soda blasting is a mild form of abrasive blasting using sodium bicarbonate particles and compressed air, which has a gentler effect than sandblasting.

Soda blasting involves the use of compressed air to blast particles of sodium bicarbonate with a much lower intensity than traditional abrasive blasting techniques, such as sandblasting. Soda blasting is a more gentle form of abrasive blasting. It is used to clean, strip and finish surfaces in which it causes less damage and doesn’t create hazardous substances or dust.

WHAT IS SODA BLASTING?

Soda blasting is a type of abrasive blasting which uses sodium bicarbonate (baking soda) as its abrasive media. This method is often used to remove paint or other surface coatings from different surfaces. Additionally, it is a non-chemical, non-abrasive, non-toxic, and non-destructive way to clean and restore surfaces to a like-new finish. Soda blasting has been used on a variety of surfaces from antiques to industrial parts. In addition, this method is much more eco-friendly than traditional sandblasting as it does not cause the environment damage that sandblasting can.

HOW DOES SODA BLASTING WORK?

Soda blasting works by shooting pressurized sodium bicarbonate particles particles, also known as baking soda, through a high-pressure nozzle onto a surface. The soda strips away dirt without damaging underneath, due to its low impact. It is a useful technique that can clean many surfaces, especially delicate ones without causing harm.

ADVANTAGES OF SODA BLASTING

The advantage of soda blasting is that it causes much less damage in comparison to other forms of abrasive blasting. It is also much cleaner and environmentally friendly.

DISADVANTAGES OF SODA BLASTING

There are some disadvantages with this soda blasting, the potential for hazardous dust exposure, the risk of intensifying surface contamination, and the potential for costly overspray. Soda blasting is not recommended for surfaces made of electrical equipment, wood, soft metals or plastic since it could damage these materials.

COMMON TOOLS FOR SODA BLASTING

There are several tools used when soda blasting, an air compressor, an air cooler and moisture separator, a blast pot, hose and nozzle.

WHAT MEDIA IS USED FOR SODA BLASTING?

The media used for soda blasting is sodium bicarbonate particles, the three commercial grades are the Natrium 150, Natrium 260 and Natrium 300, with the number representing the approximate median particle size in microns.

IS SODA BLASTING SAFE?

Soda blasting is a safe and eco-friendly method for removing paint and rust from surfaces. The baking soda used is generally perfectly safe, so there’s no risk of exposing the environment—or yourself—to any harmful substances. In comparison to sandblasting, soda blasting is way more safe for the environment. It is also non toxic and non abrasive.  

ALTERNATIVE TOOLS TO SODA BLASTING: THE BRISTLE BLASTER® AND MBX®

The Bristle Blaster® and MBX® from MontiPower are the new developments in the field of surface preparation. Due to the specially developed technology with patented brushes, the power tools are the perfect alternatives for the existing blasting equipment.

With the use of the Bristle Blaster® and MBX® from MontiPower, blasting with different types of loose abrasives is a thing of the past for smaller areas and difficult to access areas. The tools are easy to use, are – unlike blasting – completely safe and very effective. Not only in cleaning surfaces, but also in processing them.

With their impact, the brushes of the power tools create a profile on the surface that can be compared to the surface profile that is created after blasting. In this way, MontiPower tools are the ideal alternative to sandblasting.

HOW DO MONTIPOWER ABRASIVE BRUSHES WORK?

The Bristle Blaster® and MBX® from MontiPower are hand-operated tools, which are equipped with a rotating brush. These specially designed brushes are characterized by their sharpened flexible tips with kneed ends.

By rotating the brushes at a low RPM, the different types of surfaces are processed and cleaned easily, quickly and effectively. The kneed tips of the brushes play an important role in this. These points are held back for a very short time during the rotation of the Bristle Blaster Brush by the so-called ‘accelerator bar’. Due to this short interruption, the points – partly due to the high speed at which the brush rotates – are released with great power from behind the accelerator bar. This technique ensures that the curved tips of the brushes are immediately retracted upon contact with the surface, effectively cleaning the surface and also providing it with the characteristic micro-structure. It makes MontiPower tools the ideal surface preparation method for many sectors, and a great alternative to blasting with abrasives.

ALTERNATIVE TO BLASTING WITH ABRASIVES IN DIFFERENT SECTORS

With their many advantages, our power tools ensure that they are the ideal alternative to cleaning with abrasives for many markets. As mentioned, the traditional ways of blasting can be harmful to humans and animals, but also damaging to the environment. It makes the Bristle Blaster® and MBX® from MontiPower, among other things, an excellent alternative for surface preparation in the maritime and industrial sector.

In addition, the convenience and effectiveness of the various power tools play an important role in many sectors. A good example of this is the work in public infrastructure. The blasting of bridges, tracks and highways, among other things, is a very time-consuming and labor-intensive job, which is subject to a lot of pressure because of the time. When blasting these objects, workers are also exposed to various small particles and possible chemicals. With the use of the Bristle Blaster® and MBX® from MontiPower, abrasive blasting is a thing of the past.