Analyses et guides
Robots Below the Waterline: Fraunhofer IGP’s ROV Coating Repair Research
Independent Fraunhofer research: a robot-guided Subsea Bristle Blaster preparing steel underwater, repair coatings at 13.5 MPa pull-off, and a first river field...
Blast-Less Surface Prep Tools for Coating Companies
The contractor's guide to blast-less preparation: what it does to bids, which SSPC/ISO specs it meets, the kit a crew needs, and...
How Rotating Rust Removal Tools Replace Sandblasting
The mechanism that lets a rotating tool do a blaster's job: tip rebound, impact physics, measured 65-85 micron profiles - and the...
Best Sandblasting Alternatives for Small Steel Areas (2026)
The rotating rust removal alternatives that actually work on small steel areas - which achieve blast-like roughness, which just burnish, and what...
CAS vs AMPShare: Choosing the Right Multi-Brand Battery System for Industrial Maintenance
CAS vs AMPShare: the two main multi-brand battery platforms for industrial maintenance. Key differences, decision framework, and where MontiPower fits.
Bristle Blaster® Ultimate Cordless: SSPC-SP10 Surface Prep Without Grit, Without a Cord
For pipeline field joint coating, bridge and infrastructure spot repair, offshore structural maintenance in non-ATEX-classified zones, and any application
MontiPower Ultimate Cordless Tools: Built on CAS Battery Technology
For maintenance operations in energy, offshore, marine, and heavy industry where multiple surface preparation tasks are performed in the same shift or...
What Is the CAS (Cordless Alliance System)? A Guide for Industrial Maintenance Teams
For industrial maintenance operations that already carry CAS batteries on site, this is a significant practical change. It eliminates a dedicated battery
SSPC-SP11 Power Tool Cleaning to Bare Metal: Complete Technical Guide
Complete guide to SSPC-SP11: what bare metal means, how it differs from SP-10, minimum <a href="/pages/anchor-profile">anchor profile</a> requirements, and
How to Remove Mill Scale from Steel: Tools, Methods, and Specifications
Mill scale is a layered iron oxide coating that forms on the surface of steel during hot rolling. It consists of three...
How to Remove Vinyl Decals from Vehicles and Equipment
This guide covers every available method for vinyl decal removal, when each is appropriate, and the step-by-step procedure for removing vinyl cleanly...
Bristle Blaster® vs. Sandblasting: Which Method Achieves SSPC-SP10-Comparable Results?
This comparison is based on published independent research and MontiPower-commissioned third-party testing, not marketing claims. It covers the parameters
Surface preparation equipment
Surface preparation equipment
Preparing steel with MontiPower's power tools
Steel is used in various industries for numerous reasons. In order to keep the quality of the steel as high as possible,...
MONTIPOWER joined the CAS-ALLIANCE
During the Press Conference of 8th of December 2020, Frits Doddema, CEO of the Monti Group, for MontiPower explained to the press...
Cover Story World of Pipelines
MontiPower had the cover story in the April 2020 edition of the World of Pipelines magazine, 'From blast off to landing', in...
MontiPower® joins businesses into Montipower®Americas, inc.
MTI’s present offices in Houston will be closed after a brief transition period. Nevertheless, MontiPower® will continue to service the SouthWest US...
Aucun article ne correspond. Demander à un spécialiste →