Preparation from scratch
Preparation from scratch

BRISTLE BLASTER®
AXIAL

Specially designed to remove corrosion in areas that are difficult to reach.

MBX®Axial-Arm_
Bristle Blaster® Technology Die blaster

BRISTLE BLASTER®AXIAL

The Bristle Blaster® Axial with its patented Accelerator Bar is specially designed to remove corrosion in areas that are difficult to reach – like door rabbets, roof joints, wheel housings – to create a blasted surface for superior adhesion.

These characteristics make the Bristle Blaster® Axial a perfect complement to the well-proven Bristle Blaster® systems.

The patented Accelerator Bar ensures a significantly higher and continuous performance of the Bristle Blaster® Axial belts and thereby achieves:

Reduces surface preparation time by 75%

Creates a ‘blasted surface’ for superior adhesion

Fast paint removal

Saves time and money vs. traditional methods

High performance in rust removal

High working speed while removing undercoating

Specifications

Belts

BB steel
Bristle Blaster red
Steel, 11 & 23 mm

Specifications 

BB stainless
Bristle Blaster red
Stainless steel 11 & 23 mm

Specifications 

Accessories

ZU-061-05-Steel11
Accelerator Bar Steel 11 mm

ZU-064-02

ZU-063-05-SS11
Accelerator Bar Stainless Steel 11 mm

ZU-065-02

AS-012b
Adaptor System 11 mm

AS-012

Specifications 

MBX®Axial-Arm_
DIE BLASTER ARM

31109-PV

Boxes

BristleBlaster®Axial-Set_
Bristle Blaster®
Axial  set

Frequently asked questions

Bristle Blaster® Axial

What applications is the Bristle Blaster® Axial suitable for?

The MBX® Axial Blaster® supplements the MBX® for carrying out body work at areas that are especially difficult to reach, in particular, grooves, joints and inner edges.

Thanks to its special geometric shape and belts with just one row of wire bristles, it is ideal for working in, e.g. roof joints (rain channels), wheel housings and or door rabbets (door jambs).

The Accelerator Bar increases the striking energy of the bristles, enabling the Bristle Blaster® Axial to work highly effectively and quickly, e.g. when removing rust or sealants.

Can I also use Bristle Blaster® Axial Belts with other drive units?

No, because Bristle Blaster® Axial  Belts are specially developed for use with the Bristle Blaster® Axial drive unit. The Accelerator Bar mounted on the unit increases the kinetic energy of the bristles. The preassembled Air Pressure Regulator reduces the air pressure and ensures the optimum rotational speed. This is essential to enable the Axial Blaster® Belts to work effectively.

Can the Bristle Blaster® Axial also be used without the Accelerator Bar?

Yes, this is in principle possible. If, for instance, it is difficult to see the work area, you may have to, or we recommend that, you work without the Accelerator Bar. For this purpose, the arm on which the Accelerator Bar is mounted can be detached.

However, working WITHOUT the Accelerator Bar reduces the striking energy of the bristles and consequently their effectiveness at cleaning and removing rust.

Where can I find instructions on how to use the Bristle Blaster® Axial?

It is essential that you know how to work correctly with Bristle Blaster® Axial Technology. You can find appropriate instructions in the user manual. We also recommend that you watch our application film.

What servicing work does the MBX® Axial Blaster® need?

The compressed-air motor should be regularly oiled. All you have to do is put a few drops of low-viscosity oil into the compressed-air connection. Proper maintenance ensures that the tool enjoys a longer service life and is a precondition for warranty claims.