The complete system for getting the surface right.
Una herramienta cubre un paso y le deja unir el resto. MontiPower® le ofrece un método completo y con responsabilidad, desde la eliminación intensiva hasta un resultado verificado y listo para recubrir, con el soporte para mantenerlo en marcha. Cuatro pasos. Un sistema. Un socio responsable de todo el resultado.
The whole problem, solved by one partner
A tool solves one step and leaves you to integrate the rest. A system takes responsibility for the outcome, and that's worth more than any single feature.
One method, fewer variables
Steps designed to work together. Tercoo® extends belt life, the profile suits the coating, the result is verifiable. Less guesswork, fewer failures.
Accountable to the outcome
We don't hand off responsibility at the point of sale. From removal to verified profile, one partner stands behind the coating-ready result.
Built for the field
The whole method runs without a blast yard, in-service, confined spaces, at height. Where traditional systems can't go, ours can.
Grit-free, by design. No loose abrasive, no spent media, no secondary contamination, safer for the people doing the work, and better for the environment around it. Closing Cycles →
75–80%
of premature coating failures are caused, in whole or in part, by deficient surface preparation or application.1
1 Industry estimate, protective-coatings inspection literature. MontiPower's Controlled Preparation System is built to remove that variable. See the field measurement guide and corrosion-control framework.
Four steps, one accountable system
Each step solves part of the surface-preparation problem, and each hands off cleanly to the next. The Bristle Blaster® you may know us for is step two of four.
Proven on the coatings and substrates that matter
Cada eliminación a continuación ha sido documentada y verificada mediante escaneo 3D de superficie, en paneles de los principales fabricantes de recubrimientos de alto rendimiento, incluidos Carboline, PPG y AkzoNobel. Un método, en acero, acero inoxidable, aluminio, madera, hormigón y composite.
Limpieza comparable a ISO 8501-1 Sa 2½ & Sa3 (banda BB de 11 mm, grado de óxido D) y AMPP SSPC-SP 10 / SP 5 (NACE No. 2 / No. 1). Los resultados varían según la calidad del acero, el grado de óxido, la banda y la técnica.
Preparation for life.
For spot repair and maintenance per m².
The World of MontiPower®
One accountable system, from bare problem to coating-ready and proven. See it in motion.
60% of a coating's success is decided before the first coat goes on.
One system.
From bare problem to proven.
Tell us your substrate, standard and environment, a specialist will map the right method for your job and connect you with your local partner.