Preparation from scratch
Preparation from scratch

MBX® AXIAL

Spécialement conçu pour éliminer la corrosion dans les zones difficiles d’accès.

MBX®Axial(without AcceleratorBar)
Home > Produits > Outils motorises > MBX® Axial

MBX®AXIAL

Le MBX® Axial avec sa Barre d’accélération brevetée est spécialement conçu pour éliminer la corrosion dans les zones difficiles d’accès, telles que les rainures des portes, les joints du toit et les coffrages des roues, afin de créer une surface grenaillée pour une meilleure adhésion.

Ces caractéristiques font du MBX® Axial le complément parfait pour les systèmes MBX® éprouvés.

La Barre d’accélération brevetée assure des performances significativement plus élevées et continues des courroies MBX® Axial et donc :

  • Performances élevées pour l’élimination de la rouille
  • Elimination rapide de la peinture
  • Vitesse de travail élevée lors de l’élimination des sous-couches

Réduit le temps de préparation des surfaces de 75 %

Crée une ‘surface grenaillée’ pour une meilleure adhésion

Option unique de barre d’accélération on & off

Fait gagner du temps et de l’argent comparé aux méthodes traditionnelles

Inclut un raccord tournant

SPECIFICATIONS

Fiche technique

COURROIES

MB-020 coarse 11mm
COURROIE MBX® GROSSIERE, ACIER
NOIRE, 11 MM
MB-021 medium 11mmDEZE
COURROIE MBX® MOYENNE, ACIER
OCRE, 11 MM
MB-028 fine 11mm
COURROIE MBX® FINE, ACIER
VERTE, 11 MM
MB-030 stainless coarse 11mm
COURROIE MBX®, ACIER INOXYDABLE
GROSSIERE, BLEUE, 11 MM
MB-031 stainless fine 11mm
COURROIE MBX®, ACIER INOXYDABLE
FINE, BLEUE, 11 MM

ACCESSOIRES

ZU-061-05-Steel11
BARRE D’ACCELERATION EN ACIER 11 MM
ZU-063-05-SS11
BARRE D’ACCELERATION EN ACIER INOXYDABLE 11 MM
AS-012b
SYSTEME D’ADAPTATEUR 11 MM

BOITES

MBX®Axial_Set_
ENSEMBLE MBX® AXIAL

QUESTIONS FREQUEMMENT POSEES

MBX®Axial 

What applications is the MBX® Axial suitable for?

The MBX® Axial Blaster® supplements the MBX® for carrying out body work at areas that are especially difficult to reach, in particular, grooves, joints and inner edges.

Thanks to its special geometric shape and belts with just one row of wire bristles, it is ideal for working in, e.g. roof joints (rain channels), wheel housings and or door rabbets (door jambs).

The Accelerator Bar increases the striking energy of the bristles, enabling the MBX® Axial to work highly effectively and quickly, e.g. when removing rust or sealants.

Can I also use MBX® Axial Belts with other drive units?

No, because MBX® Axial Belts are specially developed for use with the MBX® Axial drive unit. The Accelerator Bar mounted on the unit increases the kinetic energy of the bristles. The preassembled Air Pressure Regulator reduces the air pressure and ensures the optimum rotational speed. This is essential to enable the MBX® Axial Belts to work effectively.

Can the MBX® Axial also be used without the Accelerator Bar?

Yes, this is in principle possible. If, for instance, it is difficult to see the work area, you may have to, or we recommend that, you work without the Accelerator Bar. For this purpose, the arm on which the Accelerator Bar is mounted can be detached.

However, working WITHOUT the Accelerator Bar reduces the striking energy of the bristles and consequently their effectiveness at cleaning and removing rust.

Where can I find instructions on how to use the MBX® Axial?

It is essential that you know how to work correctly with MBX® Axial Technology. You can find appropriate instructions in the user manual. We also recommend that you watch our application film.

What servicing work does the MBX® Axial need?

The compressed-air motor should be regularly oiled. All you have to do is put a few drops of low-viscosity oil into the compressed-air connection. Proper maintenance ensures that the tool enjoys a longer service life and is a precondition for warranty claims.