Preparation from scratch
Preparation from scratch


Especialmente diseñado para eliminar la corrosión en zonas de difícil acceso.


El MBX® Axial está especialmente diseñado para eliminar la corrosión en zonas de difícil acceso – como los rebordes de las puertas, las juntas del techo, los alojamientos de las ruedas – para crear una superficie granallada para una adhesión superior.

Estas características hacen que el Axial sea un complemento perfecto para los sistemas MBX® bien probados.

Alto rendimiento en la eliminación del óxido

Rápida eliminación de la pintura

Alta velocidad de trabajo mientras se quita la capa inferior


Ficha técnica


MB-020 coarse 11mm
MBX® belt, steel, coarse
black, 11 mm


MB-021 medium 11mmDEZE
MBX® belt, steel, medium,
ochre, 11 mm


MB-028 fine 11mm
MBX® belt, steel, fine,
green, 11 mm


MB-030 stainless coarse 11mm
MBX® belt, stainless steel
coarse, blue, 11 mm


MB-031 stainless fine 11mm
MBX® belt, stainless steel
fine, blue, 11mm



Accelerator Bar Steel 11 mm


Accelerator Bar Stainless Steel 11 mm


Adaptor System 11 mm



MBX® Axial  set



What applications is the MBX® Axial suitable for?

The MBX® Axial Blaster® supplements the MBX® for carrying out body work at areas that are especially difficult to reach, in particular, grooves, joints and inner edges.

Thanks to its special geometric shape and belts with just one row of wire bristles, it is ideal for working in, e.g. roof joints (rain channels), wheel housings and or door rabbets (door jambs).

The Accelerator Bar increases the striking energy of the bristles, enabling the MBX® Axial to work highly effectively and quickly, e.g. when removing rust or sealants.

Can I also use MBX® Axial Belts with other drive units?

No, because MBX® Axial Belts are specially developed for use with the MBX® Axial drive unit. The Accelerator Bar mounted on the unit increases the kinetic energy of the bristles. The preassembled Air Pressure Regulator reduces the air pressure and ensures the optimum rotational speed. This is essential to enable the MBX® Axial Belts to work effectively.

Can the MBX® Axial also be used without the Accelerator Bar?

Yes, this is in principle possible. If, for instance, it is difficult to see the work area, you may have to, or we recommend that, you work without the Accelerator Bar. For this purpose, the arm on which the Accelerator Bar is mounted can be detached.

However, working WITHOUT the Accelerator Bar reduces the striking energy of the bristles and consequently their effectiveness at cleaning and removing rust.

Where can I find instructions on how to use the MBX® Axial?

It is essential that you know how to work correctly with MBX® Axial Technology. You can find appropriate instructions in the user manual. We also recommend that you watch our application film.

What servicing work does the MBX® Axial need?

The compressed-air motor should be regularly oiled. All you have to do is put a few drops of low-viscosity oil into the compressed-air connection. Proper maintenance ensures that the tool enjoys a longer service life and is a precondition for warranty claims.