Surface Preparation Where Access and Safety Are Critical
Limited access, reduced ventilation, and operational restrictions all increase risk, while coating performance requirements remain unchanged.
Control is not optional
Traditional abrasive blasting is often restricted or prohibited in these conditions. When preparation is compromised, coatings fail, leading to early corrosion in the hardest places to access and repair.
“In confined spaces, control is not optional, it is essential.”
Limited access
Restricted manoeuvrability inside tanks, vessels, and compartments.
Air quality
Reduced ventilation makes dust and fumes a critical safety concern.
HSE risk
Higher risk for operators requiring strict permit and compliance control.
Contamination
Extreme sensitivity to debris in enclosed, operational environments.
Reduce exposure, maintain quality
MontiPower supports a preventive, controlled strategy, allowing surfaces to be prepared correctly while reducing operator exposure and environmental impact. The result: safer work, cleaner air, and coating quality that holds up to inspection. Grit-free preparation with the Bristle Blaster® keeps dust and media out of the equation entirely.
Engineered for restricted spaces
Controlled interaction
Prepare steel surfaces without loose abrasives, excessive dust, or media.
Reduced contamination
Capture residues at the source, minimizing spread in enclosed spaces.
Difficult access
Prepare surfaces inside tanks, vessels, and enclosed structures.
Inspectable results
Deliver preparation quality that can be verified, even in confined zones.
Why it matters
Operator safety
Improved operator safety in enclosed environments.
Cleaner environments
Cleaner working environments with minimal dust.
Inspectable quality
Consistent, inspectable quality.
Less containment
Reduced need for containment.
Lower failure risk
Lower risk of premature failure.
La confiance de projets dans le monde entier
No blast pot, no blast containment, no media recovery: one operator prepares tank internals, ballast tanks and vessel interiors with minimal dust. ABS Type Approved for shipbuilding, including ballast water tanks.
Découvrez ce qui convient à ce travail
Built for the hardest places to reach
With decades of experience and patented technology, MontiPower supports operators and contractors preparing surfaces safely inside tanks, vessels, and enclosed structures.