News

MontiPower® Australia wins award for 'Best Exhibition Booth'

November 26, 2019By MontiPower1 min read
The short answer

MontiPower® Australia wins award for 'Best Exhibition Booth'

Great news from Australia: MontiPower® Australia wins the award for 'Best Exhibition Booth' at the Corrosion & Prevention Conference, which is a testament to the new MontiPower® branding. This was MontiPower® Australia’s 12th exhibition at the Corrosion & Prevention Conference and certainly one of the more successful. Apart from winning the award, there was a lot of interest to our technology! Congratulations to Phil Chester and the Australian team and thank you for your great job!the award of Corrosion and Prevention Conference
Filed underNews & Stories
Keep reading

Relevant reads

Robots Below the Waterline: Fraunhofer IGP’s ROV Coating Repair Research
Corrosion

Robots Below the Waterline: Fraunhofer IGP’s ROV Coating Repair Research

Independent Fraunhofer research: a robot-guided Subsea Bristle Blaster preparing steel underwater, repair coatings at 13.5 MPa pull-off, and...

Read →
News

All about MontiPower's metal cleaning machines

Metal can be affected by various factors. For example, rust can develop on the metal surface, mill scale...

Read →
News

Sandblasting vs. abrasive blasting

Sandblasting vs. abrasive blasting There are a number of ways to prepare and clean metal surfaces. Two terms...

Read →
Have a job like this?

Tell us your surface.
We'll recommend the method.

Get a specific recommendation for your substrate, coating and standard, not a generic brochure.

Talk to an Expert →Find your local distributor →
Find your belt in 60 seconds → · Surface Preparation Guide (PDF) ↓