Coatings
Hempel Coating Workshop in Argentina
The short answer
Hempel Coating Workshop in Argentina
Hempel Coating Workshop in Argentina
Education is key to make sure there is no disagreement over quality of surface preparation and coating. MontiPower Brasil, Mr. Dirk Pohlmann and his team trained more than 22 companies with people from different backgrounds such coating contracting, coating application companies, surface preparation firms and Hempel sales partners. We thank Hempel for this opportunity. The feedback was amazing. For optimal quality, preparation and coating go hand in hand.
Keep reading
Relevant reads
Coatings
Research study: qualifying offshore-wind repair coatings — and the surface-prep step behind them (RepaKORR)
The BMBF-funded RepaKORR project studied damage, accelerated ageing and offshore application procedures for wind-structure repair coatings — with...
Read →
Corrosion
Robots Below the Waterline: Fraunhofer IGP’s ROV Coating Repair Research
Independent Fraunhofer research: a robot-guided Subsea Bristle Blaster preparing steel underwater, repair coatings at 13.5 MPa pull-off, and...
Read →
Coatings
Why Spot Blasting Can Limit Coating Performance
Patch repairs fail at the rim: how spot blasting creates abrupt edges, feathering failures and halo corrosion -...
Read →Have a job like this?Tell us your surface.
Tell us your surface.
We'll recommend the method.
Get a specific recommendation for your substrate, coating and standard, not a generic brochure.