Preparation from scratch
Preparation from scratch

MBX®
Pneumatic

Removes rust, paint, underseal and sealants from car panels with ease.

MBX® PNEUMATIC

The MBX® -the one step tool that easily removes rust, corrosion, oxidation, adhesives, gaskets, layers of paint, undercoating, sealers, vinyl and dresses weld seams. The flexible-wire belts rotate in a patented

housing, spinning outward with centrifugal force and working on a cushion of air. Specially designed bristles are U-shaped staples inserted through a durable nylon belt and provide safe, long lasting performance.

Rapidly removes corrosion and oxidation- both hard and soft material

Performs on uneven surfaces

Highly flexible in tight areas

No clogging or gumming of bristles

Cleans surfaces evenly

Full visibility of work surface

Specifications

Technical Datasheet

Belts

MBX Belts

MB-001 coarse 23mm
Steel, coarse. 23mm.

Coating removal

Technical Datasheet

MB-020 coarse 11mm
Steel, coarse. 11 mm.

Coating removal

Technical Datasheet

MB-009 medium 23mm
Steel, medium. 23 mm.

Derusting

Technical Datasheet

MB-021 medium 11mmDEZE
Steel, medium. 11 mm.

Derusting

Technical Datasheet

MB-005 fine 23mm
Steel, fine. 23 mm.

Cleaning

Technical Datasheet

MB-028 fine 11mm
Steel, fine. 11 mm.

Cleaning

Technical Datasheet

MB-011 stainless coarse 23mm
Stainless steel, coarse. 23 mm.

Aluminium

Technical Datasheet

MB-011 stainless coarse 23mm
Stainless steel, coarse. 11 mm.

Aluminium

Technical Datasheet

MB-007 stainless fine 23mm
Stainless steel, fine. 23 mm.

Aluminium

Technical Datasheet

MB-028 fine 11mm
Stainless steel, fine. 11 mm.

Aluminium

Technical Datasheet

ZU-010-01d
Vinyl Zapper®

Decal power

More information

Accessories

AS-009a
Adaptor System 23 mm

AS-009

Specifications

AS-012b
Adaptor System 11 mm

AS-012

Specifications

ZU-071 quadrat
Air Pressure Regulator 23 mm

ZU-071

Specifications (NPT)

Specifications

Air Pressure Regulator 11 mm

ZU-070

Specifications (NPT)

Specifications

ZU-020_Dust Exhaust for MBX® Pneumatic_RGB_72dpi
Dust Exhaust

ZU-020

Specifications

ZU-003_Re-sharpening Stone_MBX® Belts coarse and medium_RGB_72dpi
Re-sharpening tool
for belts coarse & medium

ZU-003

ZU-073b
Swivel connector

ZU-073

Specifications

Boxes

SP-121-BMC-case-new-lable-and-contents-1024x878
MBX® Pneumatic set
ZU-010-01d

The MBX® Pneumatic set includes the Vinyl Zapper®

The MBX® Pneumatic is also available as standalone (without the extra belts and case)

Frequently asked questions

MBX®

What applications is the MBX® suitable for?

The MBX® Technology has been developed for preparing the surface of bodywork panels.

A selection of different MBX® Belts is available that are suitable for specific types of work:

  • MBX® Belt coarse, black: Underseal removal
  • MBX® Belt medium, ocher: Rust removal
  • MBX® Belt fine, green: Paint removal

Also available are blue MBX® Belts with stainless steel bristles, which are ideal for preparing body parts made of stainless steel, aluminum or other nonferrous metals.

Note: The MBX® is generally unsuitable for preparing surfaces other than those of vehicle body parts. The surfaces of steel structures are best prepared using the Bristle Blaster®.

What results does the MBX® Technology deliver?

The MBX® Technology is suitable for cleaning, that is, for removing coatings, rust and paint from car body panels. On such substrates, MBX® Belts – depending on the type of belt – also create a finish similar to that achieved with sandblasting (MBX® Belts coarse and medium).

However, the MBX® Technology is not suitable for preparing steel surfaces, especially when surface cleanliness (e.g. Sa 2½) and roughness specifications have to be met. The Bristle Blaster® should be used for such applications.

Can I also use MBX® Belts with other drive units?

No! MBX® Belts are specially designed for use with the MBX® drive units. These drive units run at the recommended optimum speed required by the MBX® Belts.

Working at the right speed (idling speed of MBX® Pneumatic = 3,500 rpm, MBX® Electric = 3,200 rpm) guarantees the best results and maximum lifetime for the belts.

What’s more, the in-line design of the MBX® drive units ensures optimum handling and control.

Can a MBX® drive unit also be used with Bristle Blaster® or Die Blaster® Belts?

No! The MBX® drive units are only suitable for use with MBX® Belts.

The design and functionality of Bristle Blaster® and Die Blaster® Belts differ fundamentally from those of MBX® Belts: They are designed to be operated in conjunction with an Accelerator Bar.

As a result, all three types of belt (MBX®, Bristle Blaster® and Die Blaster® Belts) can only be used together with the matching drive unit.

What servicing work does the MBX® need?

Pneumatic

The compressed-air motor should be regularly oiled. All you have to do is put a few drops of low-viscosity oil into the compressed-air connection. Proper maintenance ensures that the tool enjoys a longer service life and is a precondition for warranty claims.

Electric

Clean the motor housing every time after using the tool and, in particular, blow out the fan with compressed air to remove any dust.

You can find instructions on how to replace the carbon brushes in the user manual in the section headed Maintenance. All repairs should be carried out only by specialists trained in the repair of power tools or by other appropriately qualified tool servicing staff.

Where can I find instructions on how to use the MBX®?

It is crucial that you use the MBX® correctly, so that you obtain the results that you want. You can find appropriate instructions in the user manual enclosed with every set. We also recommend that you watch our application film.