How to Treat Corroded Pinholes with the Bristle Blaster
Pinhole corrosion on pipes, tanks and vessels needs local treatment: the damaged area must be cleaned to bare metal and profiled before repair or recoating, without mobilizing abrasive blasting for a spot the size of a coin.
Why is pinhole corrosion difficult to treat?
The corrosion sits in and around a small depression. Grinding tends to smear the surface and can enlarge the defect; blasting a tiny area means containment, media and disposal out of all proportion to the job. The repair or coating then depends on the quality of preparation in exactly the hardest spot to reach.
How does the Bristle Blaster approach it?
The rotating bristle tips strike into the depression and rebound, removing corrosion and leaving an anchor profile in one action, locally, with a hand-held tool and no loose media. The surrounding intact coating stays untouched. Watch the treatment below.
Request a quote Book operator training
Related
Water-Driven Underwater Surface Preparation: Bristle Blaster® Subsea in Japan
MontiPower Japan carried out the first field test in Japan of a water-driven underwater surface preparation system, for...
Read →Bristle Blaster® + Tercoo®: The 2-in-1 Surface Preparation System
The 2-in-1 system pairs two MontiPower tools on one drive unit: Tercoo® removes heavy coatings and rust, then...
Read →Dustless Blasting with the Bristle Blaster®
“Dustless blasting” usually means wet abrasive blasting, where water suppresses the dust but abrasive is still used. The...
Read →