Bristle Blaster

One Drive Unit, Two Stages: Validating Dust-Extracted Disc and Bristle Blaster® Preparation in Japan

October 25, 2026By MontiPower Japan2 min read

Maintenance painting on Japanese steel structures usually takes two separate jobs. First a removal tool takes off the old paint and rust, typically to the level of a Grade 2 (2種ケレン) preparation. Then the surface is finished, by Bristle Blaster® or by grit blasting, to the Grade 1 (1種ケレン) level the new coating system needs. Two tools, two set-ups, and on many sites a lot of dust.

The idea: one tool for both stages

Stage 1: remove Disc with tungsten-carbide tips on the Bristle Blaster® Ultimate. Aim: Grade 2 preparation
Stage 2: finish Bristle Blaster® belt on the same drive unit. Aim: Grade 1-equivalent preparation
Dust Dust-extraction covers for both the disc and the Bristle Blaster® configuration
Status Validation in progress in Japan

Changing between the disc and the belt is a tool change on the same machine, not a change of machine. The operator carries one drive unit and one set of covers to the work face.

Validation test of the disc stage on a coated steel plate. Footage: MontiPower Japan (Japanese on-screen captions).

Where it is aimed

The target is the everyday maintenance work on Japanese infrastructure and plant: weathered steelwork, stairs, walkways and frames where the coating has failed and rust has set in, and where open blasting is impractical or would need full containment.

MontiPower Japan is measuring cleanliness and surface quality at each stage. We will publish the results when the validation is complete.

Why it matters

Most rust problems are not solved by one tool. Doing removal and finishing properly, with one machine and with the dust captured at the source, is prevention rather than cure: the new coating gets the surface it needs and lasts. Capturing dust protects the operator and the people around the site (People), keeps old paint particles out of the environment (Planet), and one drive unit for two stages means less equipment to buy, carry and maintain (Power).

Interested in the two-stage method? Tell us about your structure and coating, and we will keep you updated on the validation.

→ Contact us

Related

Filed underCase Study
Have a job like this?

Tell us your surface.
We'll recommend the method.

Get a specific recommendation for your substrate, coating and standard, not a generic brochure.