Preparation from scratch
Preparation from scratch

MBX®
Pneumatic Reverse

Remueve el óxido, la pintura, el sellado y los selladores de los paneles de los autos con facilidad.

MBX® PNEUMATIC REVERSE

El MBX® es la herramienta de un solo paso que elimina fácilmente el óxido, la corrosión, la oxidación, los adhesivos, las juntas, las capas de pintura, la capa inferior, los selladores, el vinilo y las costuras de soldadura. Las bandas de alambre flexible giran en una carcasa patentada, girando hacia afuera con fuerza centrífuga y trabajando sobre un cojín de aire.

Las cerdas especialmente diseñadas son grapas en forma de U que se insertan a través de un cinturón de nylon duradero y proporcionan un rendimiento seguro y duradero.

Elimina rápidamente la corrosión y la oxidación, tanto de los materiales duros como de los blandos.

Funciona en superficies irregulares

Altamente flexible en áreas estrechas

No hay atascos ni engomados de cerdas

Limpia las superficies de manera uniforme

Visibilidad completa de la superficie de trabajo

ESPECIFICACIONES

Ficha técnica

Belts

MBX Belts

MB-001 coarse 23mm
Steel, coarse. 23 mm.

Eliminación del recubrimiento

Ficha técnica

MB-020 coarse 11mm
Steel, coarse. 23 mm.

Eliminación del recubrimiento

Ficha técnica

MB-009 medium 23mm
Steel, medium. 23 mm.

Desmantelamiento

Ficha técnica

MB-021 medium 11mmDEZE
Steel, medium. 11 mm.

Desmantelamiento

Ficha técnica

MB-005 fine 23mm
Steel, fine. 23 mm.

Limpieza

Ficha técnica

MB-028 fine 11mm
Stainless steel, fine

Limpieza

Ficha técnica

MB-011 stainless coarse 23mm
Stainless steel, coarse. 23 mm.

Aluminio

Ficha técnica

MB-011 stainless coarse 23mm
Stainless steel, coarse. 11 mm.

Aluminio

Ficha técnica

MB-007 stainless fine 23mm
Stainless steel, fine. 23 mm.

Aluminio

Ficha técnica

MB-031 stainless fine 11mm
Stainless steel, fine. 11 mm.

Aluminio

Ficha técnica

ACCESORIOS

AS-009a
Adaptor System 23 mm

Especificaciones 

AS-012b
Adaptor System 11 mm

Especificaciones 

ZU-071 quadrat
Air Pressure Regulator 23 mm

Especificaciones (NPT)

Especificaciones

Air Pressure Regulator 11 mm

Especificaciones (NPT)

Especificaciones

ZU-020_Dust Exhaust for MBX® Pneumatic_RGB_72dpi
Dust Exhaust

Especificaciones

ZU-003_Re-sharpening Stone_MBX® Belts coarse and medium_RGB_72dpi
Re-sharpening tool
PARA BELTS GRUESAS Y MEDIAS

ZU-003

ZU-073b
SWIVEL CONNECTOR

ZU-073

Especificaciones 

Boxes

Set MBX Pneumatic
MBX Set

El MBX® Pneumatic Reverse también viene solo (sin bandas ni maletín adicional)

PREGUNTAS FRECUENTES

MBX®

What applications is the MBX® suitable for?

he MBX® Technology has been developed for preparing the surface of bodywork panels.

A selection of different MBX® Belts is available that are suitable for specific types of work:

  • MBX® Belt coarse, black: Underseal removal
  • MBX® Belt medium, ocher: Rust removal
  • MBX® Belt fine, green: Paint removal

Also available are blue MBX® Belts with stainless steel bristles, which are ideal for preparing body parts made of stainless steel, aluminum or other nonferrous metals.

Note: The MBX® is generally unsuitable for preparing surfaces other than those of vehicle body parts. The surfaces of steel structures are best prepared using the Bristle Blaster®.

What results does the MBX® Technology deliver?

The MBX® Technology is suitable for cleaning, that is, for removing coatings, rust and paint from car body panels. On such substrates, MBX® Belts – depending on the type of belt – also create a finish similar to that achieved with sandblasting (MBX® Belts coarse and medium).

However, the MBX® Technology is not suitable for preparing steel surfaces, especially when surface cleanliness (e.g. Sa 2½) and roughness specifications have to be met. The Bristle Blaster® should be used for such applications.

Can I also use MBX® Belts with other drive units?

No! MBX® Belts are specially designed for use with the MBX® drive units. These drive units run at the recommended optimum speed required by the MBX® Belts.

Working at the right speed (idling speed of MBX® Pneumatic Reverse = 3,500 rpm, MBX® Electric = 3,200 rpm) guarantees the best results and maximum lifetime for the belts.

What’s more, the in-line design of the MBX® drive units ensures optimum handling and control.

Can a MBX® drive unit also be used with Bristle Blaster® or Die Blaster® Belts?

No! The MBX® drive units are only suitable for use with MBX® Belts.

The design and functionality of Bristle Blaster® and Die Blaster® Belts differ fundamentally from those of MBX® Belts: They are designed to be operated in conjunction with an Accelerator Bar.

As a result, all three types of belt (MBX®, Bristle Blaster® and Die Blaster® Belts) can only be used together with the matching drive unit.

What servicing work does the MBX® need?

Pneumatic

The compressed-air motor should be regularly oiled. All you have to do is put a few drops of low-viscosity oil into the compressed-air connection. Proper maintenance ensures that the tool enjoys a longer service life and is a precondition for warranty claims.

Electric

Clean the motor housing every time after using the tool and, in particular, blow out the fan with compressed air to remove any dust.

You can find instructions on how to replace the carbon brushes in the user manual in the section headed Maintenance. All repairs should be carried out only by specialists trained in the repair of power tools or by other appropriately qualified tool servicing staff.

Where can I find instructions on how to use the MBX®?

It is crucial that you use the MBX® correctly, so that you obtain the results that you want. You can find appropriate instructions in the user manual enclosed with every set. We also recommend that you watch our application film.