Surface Preparation for Bonded Pipeline Repairs: the 2021 Study
A peer-reviewed 2021 study evaluated surface treatments for repairing through-wall corrosion damage in metallic pipes with adhesively bonded plates — where surface preparation quality determines repair integrity.
Bonded and composite repairs let operators fix corrosion damage without cutting out pipe — but the bond is only as good as the prepared surface. This page summarizes the peer-reviewed 2021 study on surface treatments for through-wall corrosion repairs with bonded plates.
Download the full document (PDF) ↓
What does it cover?
The study evaluates alternative surface treatments for metallic pipes repaired with adhesively bonded plates, comparing how each prepared surface performs in the bonded repair — directly relevant to composite wrap and plate-bonding repair systems used on live pipelines.
Why does it matter?
Composite repair systems are increasingly specified precisely where blasting is hardest: live lines, confined rights-of-way, in-service assets. Preparation method choice is then part of the repair design, not just execution. See pipeline applications and the field-joint preparation guide.
Related
Research study: qualifying offshore-wind repair coatings — and the surface-prep step behind them (RepaKORR)
The BMBF-funded RepaKORR project studied damage, accelerated ageing and offshore application procedures for wind-structure repair coatings — with...
Lezen →Surface Preparation for Heavy-Duty Coatings: A Substrate-by-Substrate Field Guide
The world's best coatings deserve the world's best surface preparation. A high-performance protective system — epoxy, zinc-rich primer,...
Lezen →Surface Preparation of Concrete Before Coating: Contaminants, Defects and Methods
As with steel, the success of any coating system on concrete is highly dependent on the surface beneath...
Lezen →