Preparation from scratch
Bristle Blaster® Technology Die Blaster
Preparation from scratch


Specially designed to remove corrosion in areas that are difficult to reach.

Bristle Blaster® Technology Die blaster
Bristle Blaster® Technology Die blaster
Home > Products > Die Blaster®


The Die Blaster® with its patented Accelerator Bar is specially designed to remove corrosion in areas that are difficult to reach – like door rabbets, roof joints, wheel housings – to create a blasted surface for superior adhesion.

These characteristics make the Die Blaster® a perfect complement to the well-proven MBX® systems.

The patented Accelerator Bar ensures a significantly higher and continuous performance of the Die Blaster® belts and thereby achieves:

  • High performance in rust removal
  • Fast paint removal
  • High working speed while removing undercoating

Reduces surface preparation time by 75%

Creates a ‘blasted surface’ for superior adhesion

Saves time and money vs. traditional methods


Technical Datasheet



accelerator bar steel
Accelerator Bar Steel 11 mm
accelerator bar stainless steel
Accelerator Bar Stainless Steel 11 mm
Adaptor system
Adaptor System 11 mm
adaptor system black
Adaptor System 11 mm black
Swivel connector
Swivel Connector


SDB-001 open
Die Blaster® set

Frequently asked questions

Die Blaster®

What applications is the Die Blaster® suitable for?

The Die Blaster® supplements the MBX® for carrying out body work at areas that are especially difficult to reach, in particular, grooves, joints and inner edges.

Thanks to its special geometric shape and belts with just one row of wire bristles, it is ideal for working in, e.g. roof joints (rain channels), wheel housings and or door rabbets (door jambs).

The Accelerator Bar increases the striking energy of the bristles, enabling the Die Blaster® to work highly effectively and quickly, e.g. when removing rust or sealants.

Can I also use Die Blaster® Belts with other drive units?

No, because Die Blaster® Belts are specially developed for use with the Die Blaster® drive unit. The Accelerator Bar mounted on the unit increases the kinetic energy of the bristles. The preassembled Air Pressure Regulator reduces the air pressure and ensures the optimum rotational speed. This is essential to enable the Die Blaster® Belts to work effectively.

Can the Die Blaster® also be used without the Accelerator Bar?

Yes, this is in principle possible. If, for instance, it is difficult to see the work area, you may have to, or we recommend that, you work without the Accelerator Bar. For this purpose, the arm on which the Accelerator Bar is mounted can be detached.

However, working WITHOUT the Accelerator Bar reduces the striking energy of the bristles and consequently their effectiveness at cleaning and removing rust.

Where can I find instructions on how to use the Die Blaster®?

It is essential that you know how to work correctly with Die Blaster® Technology. You can find appropriate instructions in the user manual. We also recommend that you watch our application film.

What servicing work does the Die Blaster® need?

The compressed-air motor should be regularly oiled. All you have to do is put a few drops of low-viscosity oil into the compressed-air connection. Proper maintenance ensures that the tool enjoys a longer service life and is a precondition for warranty claims.