Preparation from scratch
Preparation from scratch

BRISTLE BLASTER®
AXIAL

Especialmente diseñado para eliminar la corrosión en zonas de difícil acceso.

MBX®Axial-Arm_
Bristle Blaster® Technology Die blaster
Home > PRODUCTOS > Herramientas eléctricas > Bristle Blaster® Axial

BRISTLE BLASTER®AXIAL

El Bristle Blaster® Axial con su Accelerator Bar patentado está especialmente diseñado para eliminar la corrosión en zonas de difícil acceso – como los rebordes de las puertas, las juntas del techo, las cajas de ruedas – para crear una superficie granallada para una adhesión superior.

Estas características hacen que Bristle Blaster® Axial sea un complemento perfecto para los sistemas bien testeados de Bristle Blaster®.

El Accelerator Bar patentado asegura un rendimiento significativamente mayor y continuo de las bandas de Bristle Blaster® Axial y, por lo tanto, logra:

Reducir el tiempo de preparación de la superficie en un 75%

Crear una “superficie granallada” para una adhesión superior

Rápida eliminación de la pintura

Ahorrar tiempo y dinero frente a los métodos tradicionales

Alto rendimiento en la eliminación del óxido

Alta velocidad de trabajo mientras se quita la capa inferior

ESPECIFICACIONES

Belts

BB steel
Bristle Blaster red
Steel, 11 & 23 mm
BB stainless
Bristle Blaster red
Stainless steel 11 & 23 mm

ACCESORIOS

ZU-061-05-Steel11
Accelerator Bar Steel 11 mm

ZU-064-02

ZU-063-05-SS11
Accelerator Bar Stainless Steel 11 mm

ZU-065-02

AS-012b
Adaptor System 11 mm

AS-012

MBX®Axial-Arm_
DIE BLASTER ARM

31109-PV

Boxes

BristleBlaster®Axial-Set_
Bristle Blaster®
Axial  set

PREGUNTAS FRECUENTES

Bristle Blaster® Axial

What applications is the Bristle Blaster® Axial suitable for?

The MBX® Axial Blaster® supplements the MBX® for carrying out body work at areas that are especially difficult to reach, in particular, grooves, joints and inner edges.

Thanks to its special geometric shape and belts with just one row of wire bristles, it is ideal for working in, e.g. roof joints (rain channels), wheel housings and or door rabbets (door jambs).

The Accelerator Bar increases the striking energy of the bristles, enabling the Bristle Blaster® Axial to work highly effectively and quickly, e.g. when removing rust or sealants.

Can I also use Bristle Blaster® Axial Belts with other drive units?

No, because Bristle Blaster® Axial  Belts are specially developed for use with the Bristle Blaster® Axial drive unit. The Accelerator Bar mounted on the unit increases the kinetic energy of the bristles. The preassembled Air Pressure Regulator reduces the air pressure and ensures the optimum rotational speed. This is essential to enable the Axial Blaster® Belts to work effectively.

Can the Bristle Blaster® Axial also be used without the Accelerator Bar?

Yes, this is in principle possible. If, for instance, it is difficult to see the work area, you may have to, or we recommend that, you work without the Accelerator Bar. For this purpose, the arm on which the Accelerator Bar is mounted can be detached.

However, working WITHOUT the Accelerator Bar reduces the striking energy of the bristles and consequently their effectiveness at cleaning and removing rust.

Where can I find instructions on how to use the Bristle Blaster® Axial?

It is essential that you know how to work correctly with Bristle Blaster® Axial Technology. You can find appropriate instructions in the user manual. We also recommend that you watch our application film.

What servicing work does the MBX® Axial Blaster® need?

The compressed-air motor should be regularly oiled. All you have to do is put a few drops of low-viscosity oil into the compressed-air connection. Proper maintenance ensures that the tool enjoys a longer service life and is a precondition for warranty claims.