Preparation from scratch
Preparation from scratch

BRISTLE BLASTER®
AXIAL

Speziell entwickelt, um Korrosion an schwer zugänglichen Stellen zu entfernen.

MBX®Axial-Arm_
Bristle Blaster® Technology Die blaster
Home > Produkte > MOTORISIERTE WERKZEUGE > Bristle Blaster® Axial

BRISTLE BLASTER®AXIAL

Der Bristle Blaster® Axial mit seinem patentierten Beschleunigungsstab wurde speziell zur Entfernung von Korrosion an schwer zugänglichen Stellen – wie Türfalzen, Dachfugen, Radkästen – entwickelt, um eine gestrahlte Oberfläche für hervorragende Haftung zu schaffen.

Diese Eigenschaften machen den Bristle Blaster® Axial zu einer perfekten Ergänzung der bewährten Bristle Blaster®-Systeme.

Der patentierte Beschleunigungsstab sorgt für eine wesentlich höhere und kontinuierlichere Leistung der Bristle Blaster® Axialgurte und erreicht dadurch:

Reduzierung der Oberflächenvorbereitungszeit um 75 %

Erzeugung einer „gestrahlten Oberfläche“ für bessere Haftung

Schnelle Lackentfernung

Zeit- und Geldersparnis gegenüber traditionellen Methoden

Hohe Leistung bei der Rostentfernung

Hohe Arbeitsgeschwindigkeit beim Entfernen von Grundierungen

SPEZIFIKATIONEN

GURTE

BB steel
BRISTLE BLASTER ROT
STAHL, 11 UND 23 MM
BB stainless
BRISTLE BLASTER ROT
EDELSTAHL 11 UND 23 MM

ZUBEHÖR

ZU-061-05-Steel11
BESCHLEUNIGUNGSSTAB, STAHL, 11 MM

ZU-064-02

ZU-063-05-SS11
BESCHLEUNIGUNGSSTAB, EDELSTAHL, 11 MM

ZU-065-02

AS-012b
ADAPTERSYSTEM 11 MM

AS-012

MBX®Axial-Arm_
DIE BLASTERARM

31109-PV

WERKZEUGKOFFER

BristleBlaster®Axial-Set_
Bristle Blaster®
AXIALSATZ

HÄUFIG GESTELLTE FRAGEN (FAQ)

Bristle Blaster® Axial

What applications is the Bristle Blaster® Axial suitable for?

The MBX® Axial Blaster® supplements the MBX® for carrying out body work at areas that are especially difficult to reach, in particular, grooves, joints and inner edges.

Thanks to its special geometric shape and belts with just one row of wire bristles, it is ideal for working in, e.g. roof joints (rain channels), wheel housings and or door rabbets (door jambs).

The Accelerator Bar increases the striking energy of the bristles, enabling the Bristle Blaster® Axial to work highly effectively and quickly, e.g. when removing rust or sealants.

Can I also use Bristle Blaster® Axial Belts with other drive units?

No, because Bristle Blaster® Axial  Belts are specially developed for use with the Bristle Blaster® Axial drive unit. The Accelerator Bar mounted on the unit increases the kinetic energy of the bristles. The preassembled Air Pressure Regulator reduces the air pressure and ensures the optimum rotational speed. This is essential to enable the Axial Blaster® Belts to work effectively.

Can the Bristle Blaster® Axial also be used without the Accelerator Bar?

Yes, this is in principle possible. If, for instance, it is difficult to see the work area, you may have to, or we recommend that, you work without the Accelerator Bar. For this purpose, the arm on which the Accelerator Bar is mounted can be detached.

However, working WITHOUT the Accelerator Bar reduces the striking energy of the bristles and consequently their effectiveness at cleaning and removing rust.

Where can I find instructions on how to use the Bristle Blaster® Axial?

It is essential that you know how to work correctly with Bristle Blaster® Axial Technology. You can find appropriate instructions in the user manual. We also recommend that you watch our application film.

What servicing work does the MBX® Axial Blaster® need?

The compressed-air motor should be regularly oiled. All you have to do is put a few drops of low-viscosity oil into the compressed-air connection. Proper maintenance ensures that the tool enjoys a longer service life and is a precondition for warranty claims.