Preparation from scratch
Preparation from scratch

MBX®
Pneumatic

Entfernt mühelos Rost, Farbe, Unterbodenschutz und Dichtstoffe von Fahrzeugteilen

MBX® Pneumatisch

Die MBX® – das Werkzeug zum Entfernen von Rost, Korrosion, Oxidation, Klebstoffen, Dichtungen, Farbschichten, Grundierungen, Dichtungsmitteln, Vinyl und zum Abrichten von Schweißnähten in einem Arbeitsgang. Die Band mit flexiblen Drähten rotieren in einem patentierten

Gehäuse und diese werden durch die Zentrifugalkraft nach außen geschleudert, wo sie auf einem Luftpolster wirken.
Die speziell entwickelten Borsten sind U-förmige Klammern, die durch einen haltbaren Nylongurt gesteckt sind und eine sichere, langlebige Leistung gewährleisten.

Entfernt schnell Korrosion und Oxidation – sowohl von hartem als auch weichem Material

Funktioniert auch auf unebenen Oberflächen

Hochflexibel in engen Bereichen

Kein Zusetzen oder Verkleben der Borsten

Reinigt Oberflächen gleichmäßig

Vollständige Sichtbarkeit der Arbeitsfläche

SPEZIFIKATIONEN

Technisches Datenblatt

Bänder

MBX-Bänder

MB-001 coarse 23mm
STAHL, GROB, 23 MM

Beschichtungsentfernung

Technisches Datenblatt

MB-020 coarse 11mm
STAHL, GROB, 11 MM

Beschichtungsentfernung

Technisches Datenblatt

MB-009 medium 23mm
STAHL, MITTEL, 23 MM

Entrostung

Technisches Datenblatt

MB-021 medium 11mmDEZE
STAHL, MITTEL, 11 MM

Entrostung

Technisches Datenblatt

MB-005 fine 23mm
STAHL, FEIN, 23 MM

Reinigung

Technisches Datenblatt

MB-028 fine 11mm
EDELSTAHL, FEIN, 11 MM

Reinigung

Technisches Datenblatt

MB-011 stainless coarse 23mm
EDELSTAHL, GROB, 23 MM

Aluminium

Technisches Datenblatt

MB-011 stainless coarse 23mm
EDELSTAHL, GROB, 11 MM

Aluminium

Technisches Datenblatt

MB-007 stainless fine 23mm
EDELSTAHL, FEIN, 23 MM

Aluminium

Technisches Datenblatt

MB-031 stainless fine 11mm
EDELSTAHL, FEIN, 11 MM

Aluminium

Technisches Datenblatt

ZUBEHÖR

AS-009a
AdaptorSystem 23 mm

Spezifikationen 

AS-012b
AdaptorSystem 11 mm

Spezifikationen 

ZU-020_Dust Exhaust for MBX® Pneumatic_RGB_72dpi
STAUBABSAUGUNG

Spezifikationen

ZU-003_Re-sharpening Stone_MBX® Belts coarse and medium_RGB_72dpi
NACHSCHÄRFWERKZEUG
FÜR BAND GROB UND MITTEL

ZU-003

ZU-073b
DREHBARER VERBINDER

ZU-073

Spezifikationen

WERKZEUGKOFFER

Set MBX Pneumatic
MBX SATZ

Die MBX® Pneumatic ist auch als Einzelgerät erhältlich (ohne zusätzliche Band und Koffer).

HÄUFIG GESTELLTE FRAGEN (FAQ)

MBX®

What applications is the MBX® suitable for?

he MBX® Technology has been developed for preparing the surface of bodywork panels.

A selection of different MBX® Belts is available that are suitable for specific types of work:

  • MBX® Belt coarse, black: Underseal removal
  • MBX® Belt medium, ocher: Rust removal
  • MBX® Belt fine, green: Paint removal

Also available are blue MBX® Belts with stainless steel bristles, which are ideal for preparing body parts made of stainless steel, aluminum or other nonferrous metals.

Note: The MBX® is generally unsuitable for preparing surfaces other than those of vehicle body parts. The surfaces of steel structures are best prepared using the Bristle Blaster®.

What results does the MBX® Technology deliver?

The MBX® Technology is suitable for cleaning, that is, for removing coatings, rust and paint from car body panels. On such substrates, MBX® Belts – depending on the type of belt – also create a finish similar to that achieved with sandblasting (MBX® Belts coarse and medium).

However, the MBX® Technology is not suitable for preparing steel surfaces, especially when surface cleanliness (e.g. Sa 2½) and roughness specifications have to be met. The Bristle Blaster® should be used for such applications.

Can I also use MBX® Belts with other drive units?

No! MBX® Belts are specially designed for use with the MBX® drive units. These drive units run at the recommended optimum speed required by the MBX® Belts.

Working at the right speed (idling speed of MBX® Pneumatic = 3,500 rpm, MBX® Electric = 3,200 rpm) guarantees the best results and maximum lifetime for the belts.

What’s more, the in-line design of the MBX® drive units ensures optimum handling and control.

Can a MBX® drive unit also be used with Bristle Blaster® or Die Blaster® Belts?

No! The MBX® drive units are only suitable for use with MBX® Belts.

The design and functionality of Bristle Blaster® and Die Blaster® Belts differ fundamentally from those of MBX® Belts: They are designed to be operated in conjunction with an Accelerator Bar.

As a result, all three types of belt (MBX®, Bristle Blaster® and Die Blaster® Belts) can only be used together with the matching drive unit.

What servicing work does the MBX® need?

Pneumatic

The compressed-air motor should be regularly oiled. All you have to do is put a few drops of low-viscosity oil into the compressed-air connection. Proper maintenance ensures that the tool enjoys a longer service life and is a precondition for warranty claims.

Electric

Clean the motor housing every time after using the tool and, in particular, blow out the fan with compressed air to remove any dust.

You can find instructions on how to replace the carbon brushes in the user manual in the section headed Maintenance. All repairs should be carried out only by specialists trained in the repair of power tools or by other appropriately qualified tool servicing staff.

Where can I find instructions on how to use the MBX®?

It is crucial that you use the MBX® correctly, so that you obtain the results that you want. You can find appropriate instructions in the user manual enclosed with every set. We also recommend that you watch our application film.